XLP-8040
Daim Ntawv Hom
TU 14
TU 15
TU 16
TSI 23
TSI 31
TSI 32
SPECIFICATIONS & PARAMETERS
| Qauv | Kev tsis lees paub ruaj khov | Kev tsis lees paub | Permeate Flow | Siv tau Membrane Area | Spacer Thickness | Cov khoom siv hloov tau |
| (%) | (%) | PIB (m³/d) | ft2 (m2) | (mil) | ||
| TX-8040-400 | 98 | 97.5 ua | 12000 (45.4) | 400 (37.2 hli) | 34 | TSW 4-8040 |
| Kev kuaj mob | Kev khiav hauj lwm siab | 100 psi (0.69 MPa) | ||||
| Ntsuas ntsuas kub | 25 ℃ | |||||
| Test kua concentration (NaCl) | 500ppm ua | |||||
| Tus nqi PH | 7–8 | |||||
| Rov qab tus nqi ntawm ib txheej membrane | 15% | |||||
| Flow ntau yam ntawm ib txheej membrane | ± 15% | |||||
| Cov xwm txheej ua haujlwm & Limitis | Kev ua haujlwm siab tshaj plaws | 600 psi (4.14MPa) | ||||
| Qhov kub siab tshaj plaws | 45 ℃ | |||||
| Max feedwater fow | Qhov siab tshaj plaws feedwater: 8040-75gpm (17m3 / h) 4040-16gpm (3.6m3/h) ceev | |||||
| Qhov siab tshaj plaws feedwater flow SDI15 | 5 | |||||
| Qhov siab tshaj plaws ntawm cov tshuaj dawb chlorine: | 0.1 ppm | |||||
| Tso cai pH ntau yam rau tshuaj ntxuav | 3-10 | |||||
| Tso cai pH ntau yam rau feedwater hauv kev ua haujlwm | 2-11 | |||||
| Qhov siab tshaj plaws poob rau ib lub caij | 15 psi (0.1 MPa) | |||||
KHOOM NTA
Nyob rau hauv tsis tshua muaj kev khiav hauj lwm siab, siab rejection thiab siab txaus yuav tau, yog li cov nqi khiav hauj lwm ntawm cov twj, pipelines, ntim thiab lwm yam khoom, raug txo.
Nws yog dav siv nyob rau hauv lub raj mis, dej haus, boiler make-up dej.kev lag luam khoom noj khoom haus thiab tshuaj tsim khoom lag luam nrog cov nqi qis thiab cov dej zoo.
