XLP-8040
Uhlobo lwePhepha
TU14
TU15
TU16
TU23
TU31
TU32
INGCACISO & IIPARAMETHA
| Umzekelo | Ukwala okuZinzile | Min Ukwala | Ukuqukuqela kokuPhumla | Indawo yeMembrane esebenzayo | Ukutyeba kwe-Spacer | Iimveliso ezinokubuyiselwa |
| (%) | (%) | IGPD(m³/d) | ft2(m2) | (mil) | ||
| TX-8040-400 | 98 | 97.5 | 12000(45.4) | 400(37.2) | 34 | ESPA4-8040 |
| Iimeko zovavanyo | Uxinzelelo lokusebenza | 100psi(0.69 MPa) | ||||
| Ubushushu besisombululo sovavanyo | 25 ℃ | |||||
| Uxinzelelo lwesisombululo sovavanyo (NaCl) | 500ppm | |||||
| PH ixabiso | 7-8 | |||||
| Ireyithi yokubuyiswa kwento enye inwebu | 15% | |||||
| Uluhlu oluhambayo lwento enye inwebu | ±15% | |||||
| Iimeko zokuSebenza kunye neMida | Uxinzelelo oluphezulu lokusebenza | 600 psi(4.14MPa) | ||||
| Ubushushu obuninzi | 45 ℃ | |||||
| Ubuninzi bezilwanyana zesondlo | Ubuninzi bezilwanyana zamanzi: 8040-75gpm(17m3/h) 4040-16gpm(3.6m3/h) | |||||
| Ubuninzi bokuqukuqela kwamanzi e-SDI15 | 5 | |||||
| Ubuninzi boxinzelelo lweklorini yasimahla: | ＜0.1ppm | |||||
| Uluhlu lwe-pH oluvunyelweyo lokucoca imichiza | 3-10 | |||||
| Uluhlu lwe-pH oluvumelekileyo lwamanzi esondlo asebenzayo | 2-11 | |||||
| Olona xinzelelo luphezulu lwehla ngento nganye | 15psi(0.1MPa) | |||||
IIMPAWU ZEMVELISO
Ngaphantsi koxinzelelo oluphantsi kakhulu lokusebenza, ukukhatywa okuphezulu kunye nokuhamba okuphezulu kunokufumaneka, ngoko iindleko zokusebenza kweempompo ezifanelekileyo, iipayipi, izitya kunye nezinye izixhobo, ziyancitshiswa.
lt isetyenziswa kakhulu kumanzi asebhotileni, amanzi okusela ngokuthe ngqo, kwibhoyila make-up amanzi.amashishini okulungisa ukutya kunye nokuvelisa amayeza aneendleko zokusebenza eziphantsi kunye nomgangatho ophezulu wamanzi.
