PW-4040
Daim Ntawv Hom
TU 14
TU 15
TU 16
TSI 23
TSI 31
TSI 32
SPECIFICATIONS & PARAMETERS
| Qauv | Kev tsis lees paub ruaj khov | Kev tsis lees paub | Permeate Flow | Siv tau Membrane Area | Spacer Thickness | Cov khoom siv hloov tau |
| (%) | (%) | PIB (m³/d) | ft2 (m2) | (mil) | ||
| TIAB SA-4040 | 99.7 ua | 99.5 ua | 2400 (9.1 hli) | 85 (7.9) rau | 34 | PIB 21-4040 LP 100 |
| Kev kuaj mob | Kev khiav hauj lwm siab | 225 psi (1.55 MPa) | ||||
| Ntsuas ntsuas kub | 25 ℃ | |||||
| Test kua concentration (NaCl) | 2500 ppm | |||||
| Tus nqi PH | 7–8 | |||||
| Rov qab tus nqi ntawm ib txheej membrane | 15% | |||||
| Flow ntau yam ntawm ib txheej membrane | ± 15% | |||||
| Cov xwm txheej ua haujlwm & Limitis | Kev ua haujlwm siab tshaj plaws | 600 psi (4.14MPa) | ||||
| Qhov kub siab tshaj plaws | 45 ℃ | |||||
| Max feedwater fow | Qhov siab tshaj plaws feedwater: 8040-75gpm (17m3 / h) 4040-16gpm (3.6m3/h) ceev | |||||
| Qhov siab tshaj plaws feedwater flow SDI15 | 5 | |||||
| Qhov siab tshaj plaws ntawm cov tshuaj dawb chlorine: | 0.1 ppm | |||||
| Tso cai pH ntau yam rau tshuaj ntxuav | 3-10 | |||||
| Tso cai pH ntau yam rau feedwater hauv kev ua haujlwm | 2-11 | |||||
| Qhov siab tshaj plaws poob rau ib lub caij | 15 psi (0.1 MPa) | |||||
KHOOM NTA
Kev ua haujlwm ruaj khov.muaj zog uniformity, siab ntws, siab rejection, ntev kev pab cuam lub neej.
Nws yog dav siv nyob rau hauv cov dej hauv nroog, dej reuse, boiler make-up dej, tshuaj lom neeg kev lag luam.papermarking, luam ntawv thiab dyeing thiab lwm yam.
