SW-8040
Uhlobo lwePhepha
TU14
TU15
TU16
TU23
TU31
TU32
INGCACISO & IIPARAMETHA
| Umzekelo | Ukwala okuZinzile | Min Ukwala | Ukuqukuqela kokuPhumla | Indawo yeMembrane esebenzayo | Ukutyeba kwe-Spacer | Iimveliso ezinokubuyiselwa |
| (%) | (%) | IGPD(m³/d) | ft2(m2) | (mil) | ||
| TS3-8040-400 | 99.8 | 99.7 | 7500(28.4) | 400(37.2) | 34 | SW30HRLE-400 |
| TS2-8040-400 | 99.7 | 99.6 | 9000(34.0) | 400(37.2) | 34 | SW30XLE-400 |
| Iimeko zovavanyo | Uxinzelelo lokusebenza | 800 psi(5.52 MPa) | ||||
| Ubushushu besisombululo sovavanyo | 25 ℃ | |||||
| Uxinzelelo lwesisombululo sovavanyo (NaCl) | 32000 ppm | |||||
| PH ixabiso | 7-8 | |||||
| Ireyithi yokubuyiswa kwento enye inwebu | 8% | |||||
| Uluhlu oluhambayo lwento enye inwebu | ±15% | |||||
| Iimeko zokuSebenza kunye neMida | Uxinzelelo oluphezulu lokusebenza | 1200 psi(8.28 MPa) | ||||
| Ubushushu obuninzi | 45 ℃ | |||||
| Ubuninzi bezilwanyana zesondlo | Ubuninzi bezilwanyana zamanzi: 8040-75gpm(17m3/h) 4040-16gpm(3.6m3/h) | |||||
| Ubuninzi bokuqukuqela kwamanzi e-SDI15 | 5 | |||||
| Ubuninzi boxinzelelo lweklorini yasimahla: | ＜0.1ppm | |||||
| Uluhlu lwe-pH oluvunyelweyo lokucoca imichiza | 3-10 | |||||
| Uluhlu lwe-pH oluvumelekileyo lwamanzi esondlo asebenzayo | 2-11 | |||||
| Olona xinzelelo luphezulu lwehla ngento nganye | 15psi(0.1MPa) | |||||
IIMPAWU ZEMVELISO
I-34mil I-spacer yejelo lokutya yamkelwe ukunciphisa ukuhla koxinzelelo kunye nokwandisa ukuchasana nokungcoliseka kunye nokukwazi ukucoca i-membrane element.
Isetyenziswa kakhulu kumanzi olwandle, ukwaliwa kwetyuwa kumanzi anoxinzelelo oluphezulu, amanzi okwenziwa kwibhoyila, ukwenza iphepha, ukuprintwa kwelaphu kunye nokudaya, ukugxininiswa kwezinto kunye nezinye iinkalo.
