SW-4040
Sheet Type
TU14
TU15
TU16
TU23
TU31
TU32
ZVINOTAURWA & PARAMETERS
| Model | Kurambwa Kwakagadzikana | Min Kuramba | Permeate Flow | Inoshanda Membrane Area | Spacer Ukobvu | Replaceable products |
| (%) | (%) | GPD(m³/d) | ft2(m2) | (mil) | ||
| TS3-4040 | 99.8 | 99.7 | 1600(6.1) | 85(7.9) | 34 | |
| TS2-4040 | 99.7 | 99.6 | 1900(7.2) | 85(7.9) | 34 | |
| Testing Conditions | Operating pressure | 800 psi(5.52 MPa) | ||||
| Test solution tembiricha | 25 ℃ | |||||
| Test solution concentration (NaCl) | 32000 ppm | |||||
| PH kukosha | 7-8 | |||||
| Recovery rate ye single membrane element | 8% | |||||
| Kuyerera kwemhando yeimwe membrane element | ±15% | |||||
| Operating Conditions & Limitis | Maximum kushanda kudzvinyirira | 1200 psi (8.28 MPa) | ||||
| Maximum tembiricha | 45 ℃ | |||||
| Maximum feedwater fow | Nhamba yepamusoro yemvura yekudya: 8040-75gpm (17m3/h) 4040-16gpm(3.6m3/h) | |||||
| Maximum feedwater flow SDI15 | 5 | |||||
| Maximum concentration yemahara chlorine: | ＜0.1ppm | |||||
| Inobvumidzwa pH yemhando yekuchenesa makemikari | 3-10 | |||||
| Inobvumidzwa pH renji yemvura yekudyisa iri kushanda | 2-11 | |||||
| Maximum pressure drop per element | 15psi(0.1MPa) | |||||
Nezvedu
34mil Feed chiteshi spacer inogamuchirwa kudzikisa kudonha kwekumanikidza uye inosimudzira anti kusvibiswa uye anti kuchenesa kugona kwe membrane element.
Inoshandiswa zvakanyanya mumvura yegungwa, kurambwa kwemunyu kwemvura yakakwira brackish, boiler yekugadzira mvura, kugadzira mapepa, kudhinda machira uye dhayi, kusungirirwa kwezvinhu uye mimwe minda.
